کدهای خطا HP LaserJet 1018

پنجشنبه 10 اسفند ماه 1402
LED statusDescription
OFF
ON
Ready
The product is ready to print.
No action is necessary.
OFF
Blinking
Processing data
The product is receiving of processing data.
Wait for the job to print.
Blinking
Blinking
Cleaning mode
A cleaning page is printing.
Wait until the cleaning page has finished and the printer is in the Ready state. This could take up to two minutes.
Blinking
OFF
Out of memory
The printer is out of memory.
The page you are printing might be too complex for the printer's memory capacity. Try lowering the resolution.
Blinking
OFF
Attention: door open, no print cartridge, or media jam
The printer is in an error state that requires operator intervention.
Check the following:
The print cartridge door must be completely closed
The print cartridge is correctly installed.
There is no media jam.
Blinking
Blinking
Printer initialization
The printer is initializing.
No action is necessary.
ON
ON
Fatal error
Turn off the printer, and then unplug the printer power cord for 30 minutes. Plug the printer power cord into the power outlet, and then turn the printer on.
OFF
OFF
Make sure that the power switch is in the on position. 
Make sure that the printer power cord is plugged into a active power outlet. 
Unplug both ends of the printer power cord, and then plug the power cord back into the printer and the power outlet.